140-150Mhz VHF Booster 1000W

Description :

Brand New

1000 Watt Linear Amplifie with 3-4 Watt input

With Coaxial Relay for Transmit and Receive Automatic Switch

There is Additional Standby and Ready Switch,
It does automatically read your signal, and boost it
when the Signal Finish, it will back to the RX mode

Please Watch our Youtube :

High quality Broadband FM, CW and AM Booster Linear Amplifier.
This is a serious RF amplifier for broadband design from 140-150 Mhz.
It is design for 144 Mhz Operation, and it has the same output power from 140-150 Mhz,
It has a build in SWR Protection, so it will Protect the Booster from High SWR and Over Power.

to Lower power you can give it input with 1-3 watt, it will produce around 0 – 800 Watt.

With 700 Watt Output, you can transmit without stopping for 24 hours, means that this unit is really rugged design.
Input Power, Forward Power Reading and Reflect Power reading are available from the front display.
You will know, what is your antenna performance, when you use this booster

Technical specifications:

No Tune Broadband Full Channel VHF BAND 140-150 Mhz
With SWR Protection
With Over Power Protection
With Over Heat Protection
Forward Power Reading
Reflect Power Reading
Input Power Reading
COMPATIBLE with FM, CW, and AM
RF input 2w-4w , Max 4 Watt
RF Out 800 Watt, Maximum 1000 Watt Max
RF input – N type Connector
RF output – DIN type Connector
50 OHM INPUT IMPEDANCE
50 OHM OUTPUT IMPEDANCE
EXCELLENT LINEARITY
SPECIAL GA-AS TECHNOLOGY USED
WIDEBAND LINEAR POWER STAGE
Input VOltage DC 48-50 Volts

Testing Current
Testing Power
Testing Input
Testing Spectrum Analyzer